Docs

Bandwidth Package

User Guide

Creating a Bandwidth Package

Prerequisites

You have completed the VolcanoEngine account registration and real-name authentication.

Ensure that the sum of both your available balance and the coupons available for Bandwidth Package is not less than CNY 100.00, and the available balance must be no less than 0. For procedure, see Recharge guide.

Procedure

In the top menu bar, select a target region and project.

Click Create Bandwidth Package.

Configure the basic information for the Bandwidth Package instance.

Parameter	Description	Sample value
Billing method	Select a billing method for the Bandwidth Package. Support Pay-as-you-go and Subscription.	Pay-as-you-go
Region	Select the region of the Bandwidth Package. The Bandwidth Package instance only supports adding elastic IP addresses (EIPs) or IPv6 Internet bandwidth in the same region, and does not support changing region after creation.	China (Beijing)
Name	Type in a name for the Bandwidth Package.	BandwidthPackage-01
Protocol type	Select a protocol type for the Bandwidth Package. IPv4: The Bandwidth Package with IPv4 protocol only supports adding IPv4 EIPs. Dual-stack: The Bandwidth Package with dual-stack protocol supports adding both IPv4 EIPs and IPv6 Internet bandwidth.	IPv4

Configure the ISP and bandwidth for the Bandwidth Package instance.

Parameter	Description	Sample value
Security protection	Specify a protection type for the Bandwidth Package. Default: Default protection, which means creating a Bandwidth Package that supports adding the EIP with default protection. Enhanced protection, which means creating a Bandwidth Package that supports adding the EIP with enhanced protection. Currently, dual-stack is not available for Bandwidth Package instances. For more about EIPs with default/enhanced protection, see Applying for an EIP. tip Bandwidth Package with enhanced protection is in the beta stage. If you need a trial, please contact your account manager. After the application is completed, you cannot change the protection type. Proceed with caution. Subscription defaults to and supports only the default protection.	default
ISP	Specify an ISP for the Bandwidth Package. The EIP and the IPv6 Internet bandwidth with the same ISP can be added to the Bandwidth Package. BGP (multi-ISP) is recommended. If you need another ISP, contact your account manager.	BGP (multi-line)
Metering method	When Billing method is set to Pay-as-you-go, select a metering method for the Bandwidth Package. Support Pay-by-bandwidth, Pay-by-main-traffic, and Pay-by-95th-peak. tip Split bills are available for Bandwidth Packages metered by Pay-by-main-traffic or Pay-by-95th-peak. With split bills, you can view the usage proportion and cost allocation for each EIP in the Bandwidth Package. Pay-by-95th-peak is in the beta stage. To request a trial, please contact your account manager.	Pay-by-bandwidth
Maximum bandwidth	Set the maximum bandwidth for the Bandwidth Package, measured in Mbps. For the bandwidth range, see Bandwidth limits.	100 Mbps

Configure more information and the advanced option for the Bandwidth Package instance.

Parameter	Description	Sample value
Purchase time	When Billing method is set to Subscription, set a purchase duration for the Bandwidth Package.	1 month
Automatic renewal	When the billing method is set to Subscription, check Automatic renewal as needed. If Automatic renewal is enabled, the renewal cycle is one month for both monthly and yearly Subscription Bandwidth Packages. The number of renewals defaults to unlimited. You can manually disable automatic renewal or go to the Billing center to edit the auto-renewal times. For more information, see Automatic renewal.	Enable
Affiliated project	Select a project to which the Bandwidth Package belongs. For more information, see Project management. If you select All Resources from the top menu bar before accessing the creation page, you can select an existing project from the drop-down list. If you select a target project from the top menu bar before accessing the creation page, you can only select the target project. If you want to migrate the Bandwidth Package to another project after creation, see Transferring resources in project.	default
Tags	Add one or more tags for the Bandwidth Package instance. A tag consists of the tag key (Key) and the tag value (Value), and is used to tag Bandwidth Package instances for classification and search. For more information, see Tag management. Click the icon to add multiple tags. A single Shared Bandwidth Package can have up to 20 tags. The Keys of multiple tags for the same Bandwidth Package must be unique. Each Key has only one Value. The Key and the Value are case-sensitive. For example, the Key=tag and the Key=Tag are two different Keys.	bwp:v1

Click Confirm order.

Follow the console guidance to review and accept the legal terms.

Pay-as-you-go: Click Buy now to complete the action.

Subscription: Click Agree and buy, click Next, select a payment method, and then click Pay to complete the payment by the selected method.

After submitting the payment information, complete the payment within the specified time. Otherwise, the order will be canceled.

What to do next

Add EIP or IPv6 Internet bandwidth: After the Bandwidth Package is created, you can add an EIP or IPv6 Internet bandwidth to the Bandwidth Package instance to share the same bandwidth resources. This helps reduce your Internet access costs.